WILO 2121253 VEROTWIN DPL 50/130-2,2/2 IE3 PUMP

WILO 2121253 VEROTWIN DPL 50/130-2,2/2 IE3 PUMP.

The Wilo VeroTwin 50/130-2,2/2 Pump is a glanded single-stage, low pressure in-line double pump. It is used for pumping heating water, cold water and water/glycol mixtures that does not contain abrasive substances in heating, cold water and cooling systems.

The VeroTwin pump has a space saving design due to the double pump configuration and it offers main/standby mode or peak-load operation via an external auxiliary device. The VeroLine has a high standard of protection against corrosion due to the cataphoretic coating.

Pump Specification

• Minimum Efficiency Index (MEI): 0.7
• Permitted fluids: Water
• Pipe connection: DN 50
• Port-to-port length: 340mm
• Maximum operating pressure: 10 bar

Motor Data

• Motor efficiency class: IE3
• Mains connection: 3~400 V, 50 Hz
• Voltage tolerance: ±10%
• Rated power P₂ 2.20 kW 4.50 A
• Protection class motor: IP55
• Insulation class: F
• Integrated full motor protection: Special version with PTC thermistor sensor (KLF) at additional charge

Pump Material

• Shaft: Stainless steel (1.4021, X20Cr13)
• Lantern: Cast iron (5.1301, EN-GJL-250)
• Pump housing: Cast iron (5.1301, EN-GJL-250)
• Impeller: Plastic (PPE+PS-GF30)
• Mechanical seal: AQEGG

---

The WILO 2121253 VEROTWIN DPL 50/130-2,2/2 IE3 PUMP is a genuine, brand new Wilo product, covered by a Wilo manufacturer's guarantee.

Not what you're looking for? Try our unique Spares Finder tool or you can view all Wilo products.

For advice on this or any product, please call us on 0330 123 3707, email us at web@dhsspares.co.uk, or see additional ways to contact us here.